Imaging of Musculoskeletal Disorders Osteoporosis

December 10, 2022 | By opsoreang | Filed in: health.
DXA scan

A DXA (dual-energy X-ray absorptiometry) scan is a common medical imaging procedure used to measure bone density. DXA scans use low-dose X-rays to produce images of the bones and provide information about their density and strength. This information can help diagnose and monitor conditions such as osteoporosis, which is characterized by low bone density and an increased risk of fractures.

DXA scans are typically performed on the lower spine and hips, as these are the areas where osteoporosis is most likely to occur. The procedure is painless and noninvasive, and it typically takes less than 15 minutes. The results of the scan are typically reported in terms of the T-score, which is a measure of bone density relative to that of a healthy young adult. A T-score of -2.5 or lower is considered to be indicative of osteoporosis.

DXA scans are typically recommended for postmenopausal women and older men, as they are at an increased risk of developing osteoporosis. Other factors that may increase the likelihood of needing a DXA scan include a family history of osteoporosis, a history of fractures, and the use of certain medications that can affect bone density.

Normal DXA scan result chart

A normal DXA scan result is typically reported in terms of the T-score, which is a measure of the bone density relative to that of a healthy young adult. A normal T-score is between -1 and +1. A T-score between -1 and -2.5 indicates low bone density, also known as osteopenia. A T-score of -2.5 or lower indicates osteoporosis.

Here is an example of a DXA scan result chart, showing the T-score values for different ranges of bone density:

Bone density T-score
Normal -1 to +1
Osteopenia -1 to -2.5
Osteoporosis -2.5 or lower

It is important to note that the T-score is a relative measure, and it may not always reflect the actual strength of the bones. Other factors, such as the presence of fractures or the quality of the bone tissue, may also affect the risk of osteoporotic fractures. A DXA scan should be interpreted in the context of the individual’s medical history and other risk factors.

Abnormal DXA scan result charts

An abnormal DXA scan result is typically reported in terms of the T-score, which is a measure of the bone density relative to that of a healthy young adult. An abnormal T-score is below -1 or above +1. A T-score between -1 and -2.5 indicates low bone density, also known as osteopenia. A T-score of -2.5 or lower indicates osteoporosis.

Here is an example of an abnormal DXA scan result chart, showing the T-score values for different ranges of bone density:

Bone density T-score
Normal -1 to +1
Osteopenia -1 to -2.5
Osteoporosis -2.5 or lower

It is important to note that the T-score is a relative measure, and it may not always reflect the actual strength of the bones. Other factors, such as the presence of fractures or the quality of the bone tissue, may also affect the risk of osteoporotic fractures. An abnormal DXA scan result should be interpreted in the context of the individual’s medical history and other risk factors.

Insufficiency fractures

An insufficiency fracture is a type of bone fracture that occurs when the bone is unable to withstand the normal stresses and strains of everyday activities, such as walking or standing. Insufficiency fractures are most commonly seen in people with osteoporosis, a condition in which the bones become weak and brittle due to a loss of bone density.

Insufficiency fractures can occur in any bone, but they are most commonly seen in the spine, hips, and feet. They typically cause pain that is worse with weight-bearing activities and may improve with rest. Other symptoms may include swelling, tenderness, and difficulty moving the affected area.

Insufficiency fractures are typically diagnosed with a combination of physical examination, imaging tests, such as X-rays or MRI, and bone density tests, such as DXA (dual-energy X-ray absorptiometry). Treatment may include medications to reduce pain and inflammation, physical therapy to improve mobility and strength, and lifestyle changes to reduce the risk of future fractures. In some cases, surgery may be necessary to stabilize the affected bone.

Vertebral body fractures

Vertebral body fractures are fractures that occur in the vertebral bodies, which are the larger, solid bones of the spine. Vertebral body fractures can be caused by a variety of factors, including trauma, osteoporosis, and tumors.

Vertebral body fractures are typically classified into two types:

  1. Compression fractures: These are the most common type of vertebral body fractures. They occur when the vertebral body collapses or crushes under the weight of the body. Compression fractures are often seen in people with osteoporosis or other conditions that cause the bones to become weak and brittle.
  2. Burst fractures: These are less common than compression fractures, but they are more severe. They occur when the vertebral body fractures in multiple directions, resulting in a fragmentation of the bone. Burst fractures are often caused by high-impact trauma, such as a car accident or a fall from a height.

Vertebral body fractures can cause a variety of symptoms, including pain, stiffness, and difficulty moving. They can also lead to deformities, such as a hunched or curved spine, and can affect the function of the nervous system. Vertebral body fractures are typically diagnosed with imaging tests, such as X-rays or MRI, and bone density tests, such as DXA (dual-energy X-ray absorptiometry). Treatment may include medications to reduce pain and inflammation, physical therapy to improve mobility and strength, and, in some cases, surgery to stabilize the affected bone.

Osteoporotic wedge fracture – T-spine lateral view

An osteoporotic wedge fracture is a type of vertebral body fracture that occurs in people with osteoporosis. It is characterized by a wedge-shaped deformity of the vertebral body, where the front part of the bone collapses and the back part remains intact. This results in a loss of height and a loss of the normal curvature of the spine.

Osteoporotic wedge fractures are often seen in the thoracic spine (the middle part of the spine), but they can also occur in the lumbar spine (the lower part of the spine). They are typically diagnosed with imaging tests, such as X-rays or MRI, and bone density tests, such as DXA (dual-energy X-ray absorptiometry).

In a lateral view of the thoracic spine (also known as the T-spine), an osteoporotic wedge fracture can be seen as a collapse of the front part of the vertebral body, resulting in a wedge-shaped deformity. The normal curvature of the spine may be lost, and the vertebral body may appear shorter than the adjacent vertebrae. This deformity may be accompanied by a loss of height and a hunched or curved appearance of the spine.

Osteoporotic biconcave fracture – L-spine lateral view

An osteoporotic biconcave fracture is a type of vertebral body fracture that occurs in people with osteoporosis. It is characterized by a biconcave deformity of the vertebral body, where the front and back parts of the bone collapse and the middle part remains intact. This results in a loss of height and a loss of the normal curvature of the spine.

Osteoporotic biconcave fractures are often seen in the lumbar spine (the lower part of the spine), but they can also occur in the thoracic spine (the middle part of the spine). They are typically diagnosed with imaging tests, such as X-rays or MRI, and bone density tests, such as DXA (dual-energy X-ray absorptiometry).

In a lateral view of the lumbar spine (also known as the L-spine), an osteoporotic biconcave fracture can be seen as a collapse of the front and back parts of the vertebral body, resulting in a biconcave deformity. The normal curvature of the spine may be lost, and the vertebral body may appear shorter than the adjacent vertebrae. This deformity may be accompanied by a loss of height and a hunched or curved appearance of the spine.

Sacral fractures

A sacral fracture is a fracture that occurs in the sacrum, which is a triangular-shaped bone at the base of the spine. The sacrum connects the spine to the pelvis and supports the weight of the upper body. Sacral fractures can be caused by a variety of factors, including trauma, osteoporosis, and tumors.

Sacral fractures can be classified into several different types, depending on the location and the pattern of the fracture:

  1. Fractures of the sacral ala: These are fractures that occur in the wing-shaped part of the sacrum, which is located on either side of the sacral body.
  2. Fractures of the sacral body: These are fractures that occur in the middle part of the sacrum.
  3. Fractures of the sacral base: These are fractures that occur at the base of the sacrum, where it connects to the pelvis.

Sacral fractures can cause a variety of symptoms, including pain, stiffness, and difficulty moving. They can also lead to deformities, such as a rotated or tilted pelvis, and can affect the function of the nervous system. Sacral fractures are typically diagnosed with imaging tests, such as X-rays or MRI, and bone density tests, such as DXA (dual-energy X-ray absorptiometry). Treatment may include medications to reduce pain and inflammation, physical therapy to improve mobility and strength, and, in some cases, surgery to stabilize the affected bone.

Sacral fractures – bone scan ‘Honda sign’

A sacral fracture is a fracture that occurs in the sacrum, which is a triangular-shaped bone at the base of the spine. The sacrum connects the spine to the pelvis and supports the weight of the upper body. Sacral fractures can be caused by a variety of factors, including trauma, osteoporosis, and tumors.

A bone scan is a medical imaging procedure that uses a radioactive tracer to produce detailed images of the bones. In a bone scan, the tracer is injected into a vein and travels through the bloodstream, where it accumulates in areas of active bone metabolism. The tracer emits gamma rays, which are detected by a special camera and used to produce images of the bones.

In a bone scan of a sacral fracture, a characteristic pattern known as the “Honda sign” may be seen. This pattern is named after the Japanese radiologist who described it and is characterized by a crescent-shaped area of increased radioactivity on the side of the sacrum opposite the fracture. The Honda sign is often seen in sacral fractures of the sacral ala, which are fractures that occur in the wing-shaped part of the sacrum.

The Honda sign is not specific to sacral fractures and may be seen in other conditions that cause increased bone metabolism, such as infection or inflammation. Therefore, it should be interpreted in the context of the individual’s medical history and other imaging findings.


Leave a Reply

Your email address will not be published. Required fields are marked *